One feature I don’t like is that the green power light is very bright and always on. In addition, you can disinfect toothbrushes, nightguards-they even say cellphones. On another cycle you can do the humidifier chamber, and on a third cycle, the Lumin manual says you can clean your hose to help kill biofilm. A small tray inside lifts items up so the bottom can be cleaned at the same time. Anything the light doesn’t hit won’t get fully cleaned. Items should be wiped and free of soil before disinfecting. It uses ultraviolet light (UV-C) to kill germs, bacteria, etc (99.9% of them anyway). Just open the drawer, place items inside, close the drawer, press a button, and wait five minutes. Lumin™ CPAP Mask and Accessories Cleaner.In testing with a standard CPAP hoses, sufficient UVC penetrates the hose to offer sanitization and 3B Medical recommends using Lumin twice weekly as part of your CPAP maintenance schedule.”Important Note: Multiple uses: The Lumin can also be used to disinfect other items as well, such as a toothbrush, dentures, hearing aids, anything that will fit into the tray on the device. NOTE: “Disinfection by UVC depends on optics. Important Note: Multiple uses: The Lumin can also be used to disinfect other items as well, such as a toothbrush, dentures, hearing aids, anything that will fit into the tray on the device. UV light is a very effective disinfectant used in the health industry and hospitals. The Lumin uses a strong UV light to kill 99% of bacteria, pathogens, and fungi present on items placed inside the device. Now you can rest assured that when you are wearing your CPAP Mask that you are maintaining a healthy environment that is so crucial to successful CPAP Therapy. Lumin works with a disinfection cycle time of 5 minutes, no harmful ozone, and a 99.9% kill rate for harmful bacteria, viruses, mold and fungus. Lumin™ is the easiest and fastest way to disinfect a CPAP mask and accessories. No more harsh chemicals to disinfect CPAP masks and water chambers! The Lumin uses a powerful amount of UV light contained inside of a fail-safe chamber to kill bacteria in just Five Minutes. With 1 touch of a button and 5 Minutes is all it takes to kill the harmful bacteria that can build up in your CPAP Mask and accessories! The all new state of the art Lumin™ CPAP Mask Sanitizer is taking the market by storm. UV light will disinfect up to 99% of harmful bacteria, pathogens, and fungi that can cause infection and illness.Lumin™ CPAP Mask and Accessories Sanitizer Makes Lumin the safest and easiest choice for CPAP mask and accessory cleaning. The 5 minute UV cleaning cycle with no need for water or harmful chemicals. The dose of UV-C emitted in one 5 minute cycle is sufficient to kill most bacteria and mold on a surface. This energy spectrum is very close to the peak of the germicidal effectiveness curve of 265nm, the most lethal wave to microorganisms. The Lumin relies on a low-pressure, mercury-arc germicidal lamp designed to produce the highest amounts of UV light – where 90% of energy is generated around 254nm. The Lumin CPAP cleaner works by emitting high energy light within a narrow spectrum referred to as UV-C. The Lumin’s UV-C light source completes a disinfection cycle in just 5 minutes with a 99.9% kill rate of bacteria and germs, significantly reducing the risk of infection from an improperly cleaned CPAP. The Lumin CPAP UV Sanitizer is an easy and fast way to disinfect your CPAP mask, reservoir and other accessories without water or harmful chemicals. Details & Specs for Lumin UV CPAP Mask Sanitizer
0 Comments
Leave a Reply. |